If your car’s window is broken, you’re probably wondering how to get it fixed. Accidents happen unannounced and at weird times! And dealing with broken car windows can be very frustrating and inconvenient.

While you might not have the time and resources to get your Power Window Repair or replaced in San Diego right away, fortunately, there are some ways to manage them temporarily. However, before you can jump to fixing it in the short term, start by cleaning the glass shreds from your broken window.

Here’s how to go about it:

How to Prepare the Surface to Cover a Broken Window

Take a look at the things to get started:

• A hammer or any heavy tool
• Microfiber cloth
• Masking tape
• Gloves (ensure the material is thick to avoid getting cuts)
• Vacuum cleaner

Cleaning the glass debris

Sometimes, parts of glass still stand strong on your broken window. Removing them is necessary to avoid any further accidents. Wear gloves and use your hammer to break your window free of the most stubborn pieces.

There’s a high chance of the glass falling inside your car. So, after you’re done detaching the glass, use the vacuum cleaner to clear any glass on the seats, headrests, or carpets. Don’t forget to vacuum the window seal as well.

Dusting away the leftovers

Removing dust particles from the broken window is crucial before you cover it. It helps in sticking the masking tape better on your broken window. To wipe the dirt off, using a microfiber cloth is advised since it aids in avoiding scratches. Make sure you take your time and clean any dust particles sitting on the window frame.

Masking tape the window frame

Most people tend to look over why using masking tape is important. Duct taping your window directly hurts the car paint, causing more damage than anticipated. Covering the car window with a layer of masking tape (about two inches wide) preserves the paint and eliminates the chance of residue.

One Problem; Three Solutions

Here are three tried and tested temporary fixes for your broken car window:

Using a clear duct tape

The best thing about covering the car window opening with clear duct tape is generally available at home. That saves you a lot of hassle!

Start by taping the window with clear duct tape vertically inside first, then horizontally to ensure durability. Repeat the same process on the outside as well. Duct tape covers are sturdy and tend to keep the moisture out!

Using crash wraps

If you’re looking for the fastest and the easiest way to cover the car window, crash wraps are it! A crash wrap comes in wide plastic rolls; all you have to do is adjust them according to the size of your window. Stick it against the internal side of the window and cut according to the window size. Redo the same process for the outside of the window as well.

Crash wraps are especially useful in protecting the car’s interior from UV lights.

Using a plastic bag

Even though a plastic bag is not too reliable, it can still work if you don’t plan to use your vehicle for some time. Carefully choose a thicker material plastic bag to seal your window tightly.

Start by fixing the plastic bag from the inside first, then move to the outside. Note that plastic bags should be tightly packed to prevent them from becoming safety hazards.

Even though these solutions work, they’d only last for a short while. If you’re looking for a more permanent car window replacement or repair in San Diego, the auto glass technicians at A Auto Glass in San Diego offer impeccable services. Reach out to them and get your car looked at today.